MXR100030B AC-DC Fan Cooling EV Charger Module

30KW AC DC charging power module

New energy electric vehicles have an urgent demand for high-power and fast charging. As the core component of the DC charging device, DC electric vehicle charger module is the key to the stability and reliability of the EV charger post. The Maxwell DC fast EV charging module has high reliability, high availability and high maintainability, which can meet the voltage requirements of different battery packs, reduce the potential safety hazard and greatly save the operation and maintenance cost of life cycle.

SKU: MXR100030B Category:

Description

Input Current: 58A Max
Altitude: No derating below 2000m,When the altitude is above 1000m, it needs to set the actual altitude value, the working temperature decreases by 1℃ for each additional 100 m
Input Voltage: 260-530Vac, three-phase + PE
Grid Frequency: 45-65Hz
Power Factor: ≥0.95(6kw≤output power≤15kw); ≥0.98(20kw≤output power≤40kw)
ITHD: ≤5%(15kw≤output power≤30kw)
Output Power: 30kw
Output Voltage Range: 100-1000Vdc
Output Current Range: 0-100A continuously regulated
Rated Current: 30A
Voltage stabilised accuracy: ≤±0.5%(100V-1000V,0~20MHz)
Current stabilised accuracy: ≤±1%(Output current 20% rated current~100% rated current value)
Current Sharing Imbalance: ≤±3%
Ripple Peak to Peak: ≤1%(voltage stabilisation status, input voltage 323Vac~530Vac, output voltage 200Vdc~ 1000Vdc, output current 0~rated current)
Operating Temperature: -40℃~75℃, output derating above 55℃
Storage Temperature: -40℃~+75℃
Relative Humidity: ≤95% RH without condensation
MTBF: >500000 hours
Size(W×D×H): 360×459×85mm
Weight: ≤20kg
Efficiency(full load): >95.5%
Cooling Mode: Fan cooling
Standby Power consumption: 13W+/-0.5W
Communication Method: CAN bus
Parallel Module Quantity: ≤60 pieces
Indicator: Green: normal operation  Yellow: alarm   Red: fault
Certification: CE/TUV/EMC cTUVus

You may also like…

Go to Top