EDDI microgen eco-smart energy diverter for heaters
SKU EDDI-16A1P01
£590.00
Available on back-order
Available on back-order
Available on back-order
eddi is a solar power diverter for use with grid-tied PV or wind turbine systems. Excess energy from the micro-generation system is used to heat water or rooms rather than exporting it to the grid.
How eddi works
A grid current sensor (supplied) simply clips around the incoming supply cable. This sensor is used to monitor excess power and eddi automatically adjusts the voltage to the heater load, thereby consuming the surplus power. A self-powered wireless sensor is available separately. An internal expansion interface provides a means to add and expansion module to enable various functions such as auto switching from day-time and night-time supply, heat pump interfacing for legionella control and temperature sensing. eddi utilises myenergi’s proprietary VariSineTM technology to ensure compliance with worldwide power grid standards, for a reliable solar power diverter.
Description
Features
- 3.68KW / 16A max. heater load
- Supports two heaters (sequentially)
- Integral bypass switch
- VariSineTM PWM technology
- Fan-less cooling
- Built-in programmable boost timers
- Energy savings data logging
- Graphical back-lit LCD screen for ease of use
- Overload and short-circuit protection
- Automatic Daylight Saving Time adjustment
- Works with all myenergy devices
- Expansion module option
- Wall mounting bracket for ease of installation
- Fully EMC and safety compliant (CE)
- 3-year warranty
- Works alongside battery storage systems
- Optional remote control access via our hub device and app (optional extra)
| Specification | Details |
|---|---|
| Rated Input Power | 3.68kW |
| Rated Supply Voltage | 230V AC Single Phase (+/- 10%) |
| Supply Frequency | 50Hz / 60Hz |
| Rated Current | 16A |
| Standby Power Consumption | 3W |
| Generator Size Supported | No limit (subject to 100A per-phase grid supply) |
| Heater Load Size | 100W min. 3.68kW max. |
| Economy Tariff Sense Input | 230V AC sensing (2.5kV isolated) |
| Wireless Interface | 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options |
| Grid Current Sensor | 65A max. primary current, 16mm max. cable diameter |
| Supply Cable Entry | Rear, bottom, or side option |
| Specification | Details |
|---|---|
| Dimensions | 220 x 205 x 87mm (excluding wall bracket) |
| Weight | 4.3kg (excluding wall bracket) |
| Protection Degree | IP20 |
| Enclosure Material | Painted Zintec steel |
| Operating Temperature | -20°C to +40°C |
| Mounting Method | Wall mounting bracket |
Reviews
There are no reviews yet.