30kW 1000V Charger DC 2 DC Power Module
SKU CEG1K0100G
Product Introduction
CEG1K0100G is specially designed for EV DC input type chargers. It has high efficiency, low fan noise, high power density and
high reliability advantage. Up to 825V DC input, DC output voltage range is from 150 to 1000VDC with 30kW output power,
EMC/EMI satisfy TUV CE certification with class B level, and safety satisfy TUV CE certification.
Main feature
Inside high frequency transformer isolation
Full hot plug design
TUV CE Certification, EMC class B level
Air duct isolation design for high protection and high reliability for harsh environment
Wide output voltage range, 150-1000VDC, suitable for a wide range of EVs
Constant current for higher output power at low output voltage
Super denoise mode can get less 55 dB fan audio noise
An internal patented intelligent discharge circuit automatically discharges residual charge, simplifying system designs
Low standby power consumption with 12W. Super standy power consumption with 2W.
Wide input DC voltage from 300V to 825V DC
MPPT function to support solar power input
Totally compatible with REG1K0100G AC2DC power module in the size, interface and protocol
Wide operating temperature range, -40℃–+75℃
Application
DC Charger for EV with modular design, easily maintenance, cost efficiency, high power density and high quality
DC input Charger
Description
Technical Specification
Environmental:
Ambient Temperature －40℃～ 75℃ derating from 55℃
Storage Temperature －40℃～ 70℃
Humidity ≤95 RH non-condensing
Cooling Fan cooling
Altitude 2000m
Input Side
Input Voltage range 300Vdc～825Vdc
Max Input current 50A
Efficiency (top) ≥95 @350~500V/680~1000Vdc/60 ~100 Load current, Max point≥95.5
PV input
MPPT function support
Output Side
Output power 30kW@ voltage >300Vdc
Voltage range 150Vdc～1000Vdc
Current range 0~100A
Current sharing 1 A
Voltage stabilised accuracy 0.5
Current stabilised accuracy ≤ 1 output power in 20 ～100
Control
Communication CAN bus, Max 48 power modules parallel
Indication Light Green LED: normal operation Yellow LED: alarm Red LED: failure
Address Indication Automatic address identification, Panel dial switch for group setting
Noise Setting Power mode with max 75 dB , Denoise mode with max 65 dB , Quiet mode with max 55 dB
Super Standby Outerside 12V or 5V DO control
Alarm and protection
Input/output voltage protection Over/under voltage will automatic shut down and restart when voltage return to normal
Over current/short circuit protection Automatic shutdown and lock, need power off to restart to unlock
Over temperature protection Automatic shutdown, automatic restart when the temperature return to normal
EMC/EMI
TUV CE certification EN61851-21-2, class B
Safety TUV CE certicification EN61851-1 EN61851-23
Reliability
MTBF >300,000 h
Mechanical
Dimension 110mm H 385mm W 395mm D)
Weight ≤22.5 kg
Ordering Information
Type CEG1K0100G
Cable REG30KW31E-18, REG30KW42-18
Reviews
There are no reviews yet.